Modular / portability / easy to clean / USB-C
133*46*29mm
- Fast start:
1.1. Please fill the device with full charging before using it for the first time.
1.2. Press the key for 3 seconds to unlock/lock the device (at the same time vibration motor once).
1.3. When the work is ready, the equipment will shake, and the light will flash three times. Inhale gently and start working formally.
- work
2.1. Install the atomizer to automatically detect the heating mode, the color expression of the aperture:
Red is WAX, (resistance 0.25-0.35)
Green is DRY HERB, (resistance 0.45-0.60)
The light -free lamp ring is not bright; after the corresponding atomizer is detected, the corresponding light color is bright for 1 second.
2.2. Click to switch the temperature settings. The ordering order is blue (low) / green (middle) / red (high) / white (peak)
2.2.1 WAX mode Function red lights Long bright 1 second indicator WAX mode
Blue (low) / green (middle) / red (high) / white (peak)
Double -click to start heating, and press and hold the button to shut down. During the preheating process, the current gear light gradually lights up and destroys the effect of the breathing light. After the preheating is completed, the current gear light is long and vibrated twice, turning to the constant temperature mode. Stop output after 50 seconds of constant temperature, the current gear light is gradually extinguished and the motor vibrates 2 times
Blue light-300 degrees; (room temperature-350 degrees in 10 seconds to warm up and preheat and vibrate 2 times. After 2 times, you can smoke. The system restores 300 degrees at the same time. After 50 seconds of work, stop working and vibrate.
Green light-350 degrees; (room temperature-400 degrees 10 seconds to warm up and preheat and vibrates 2 times. After 2 times of vibration, you can smoke.
Red light-400 degrees; (room temperature-450 degrees 10 seconds to warm up and preheat and vibrate 2 times. After 2 times of vibration, you can smoke. The system restores 400 degrees at the same time.
White light-450 degrees; (room temperature -500 degrees 10 seconds to warm up and preheat and vibrate 2 times, smoke after 2 vibration, the system restores 450 degrees at the same time, and work for 50 seconds to work and vibrate)
2.2.2 DRY HERB mode Function: Green Light Long Light 1 second indicator DRY HERB mode
Double -click to start heating, and press and hold the button to shut down. During the preheating process, the current gear light gradually lights up and destroys the effect of the breathing light. After the preheating is completed, the current gear light is long and vibrated twice, turning to the constant temperature mode. Stop output after 180 seconds of constant temperature, the current gear light is gradually extinguished and the motor vibrates 2 times
Blue light-180 degrees; (room temperature-210 degrees 10 seconds to hear and preheat and vibrate 2 times. After 2 times, you can smoke. The system restores 180 degrees at the same time. After 180 seconds of work, stop working and vibrate.
Green light-200 degrees; (room temperature-200 degrees of 10 seconds to warm up and preheat and vibrate, smoking can be smoked after 2 times, the system restores 200 degree constant temperature at the same time, and work for 180 seconds to work and vibrates)
Red lamp -220 degrees; (room temperature-200 degrees of 10 seconds to hear and preheat and vibrate 2 times. After 2 times of vibration, you can smoke. The system restores 250 degrees at the same time.
2.4. When continuously use continuously, the motor can be smoked 3 times in 1 to 2 seconds. (It is best to vibrate according to the actual temperature here, because I don’t know if the user works immediately or after a few seconds or tens of seconds)
2.5. After the user is detected 4 consecutive work, it will be forcibly stopped for 5 minutes. The definition of continuous work is that the interval between two jobs does not exceed 2 minutes per minute
- Power display:
3.1 In the case of non -working status, click three times in a row to display the battery percentage percentage:
Green: Vegetables above 70% / Orange: 30%-70%Electricity / Red: Power below 30%(can only work once)
3.2: Low battery electricity [Flinking 3 times red light] You need to use it to be fully charged.
- After each use, please use a dry tool to clean the box. Gently wipe the movement.
- Product error prompt:
5.1: There is no connection in the heating cooker (5 times of white lights and 5 vibration 5 times)
5.2: Short -circuit of the heating cooker (automatic shutdown of lights, need to insert a charging wire activation machine)
5: Charging: insert USB wire charging equipment will vibrate once
> = 3V red 10%
> = 3.7V blue 30%
> = 3.9V green 60%
> = 4.1V white 90%
> = 4.15V Full of closing 95%