Q1:What is the wattage of Motar 3 coil?
A1:
You can purchase our Motar 3 kit, which includes the Motar 3 battery and Motar 3 tank. If you want to use it with a different battery box, start with the lowest temperature setting. The resistance of the Motar 3 atomizer is 0.4 ohms, so you might try using it at 12 watts.
The image shows a temperature that's too high. Excessive heat can easily burn out the coil.
.
Q2:What is the battery size of MOTAR3?
A2: the motar3 battrey size is 22*82.7mm,1850mAh
Q3:The motar 3 atomizer can use with Trunk battery?
A3:Yes, it can be used with the Trunk battery. However, it won’t have temperature control when used with other full-power batteries, which makes it easy to burn out the coil. It is recommended to use it with the Motar 3 battery for optimal performance.
Q4:The motar3 coils can be used on youcan orbit?
A4:No, they cannot. The sizes are different.
Q5:The motar 3 battery can use with other atomizers ?
A5:Yes, the Motar 3 battery can be used with any 510-threaded atomizer. However, the higher the resistance of the atomizer, the lower the temperature. This means that some atomizers may not reach the desired temperature. For example, when used with the MRBald2 atomizer, the temperature may only reach around 250 degrees Celsius. In contrast, when used with the Motar 3 atomizer, the temperature can go up to 450 degrees Celsius.
Q6:Why the vape said “check atomizer” and then stopped working.
A6:Check the atomizer; you may need to do this:
- Reinstall your atomizer and coil to ensure the atomizer is functioning properly.
- If the core is burnt out, replace it with a new one.
Because the power of the battery boxes varies, if the coil is not used with our batteries, it is recommended to start at the lowest temperature and gradually increase it. If the temperature is set too high right away, it could easily burn out the coil.
