A burnt taste in your vape, even with a new coil, can be frustrating. You’ve just replaced the coil expecting a smooth, flavorful experience, but instead, it’s harsh and unpleasant. If you’re wondering why this happens, here are some common reasons and solutions to fix it.
1. The Coil Wasn’t Primed Properly
New coils need to be primed before use to prevent burning.
What Happens:
When a dry coil is exposed to heat, the wick (usually cotton) burns instead of vaporizing the e-liquid.
Solution:
- Manually Prime the Coil: Apply a few drops of e-liquid directly onto the coil’s cotton wick. Allow it to absorb for a few minutes.
- Fill the Tank and Wait: After installing the new coil and filling the tank, let the vape sit for 5–10 minutes before taking your first puff. This ensures the wick is fully saturated.
2. Vaping at Too High a Wattage
Using a wattage setting that’s too high for your coil can burn the wick or e-liquid.
What Happens:
Excessive heat can overwork the coil, causing it to burn the cotton or the e-liquid itself.
Solution:
- Check the Recommended Wattage: Every coil has a recommended wattage range, usually printed on the coil. Stay within this range.
- Adjust Gradually: Start at the lower end of the wattage range and gradually increase until you find your preferred setting.
3. Chain Vaping or Taking Long Draws
Frequent or prolonged puffs can overheat the coil and dry out the wick faster than it can re-saturate.
What Happens:
The cotton doesn’t have enough time to absorb more e-liquid, leading to dry hits and a burnt taste.
Solution:
- Pace Your Puffs: Allow a few seconds between each puff to let the wick re-saturate.
- Use Shorter Draws: Avoid holding the fire button for too long to prevent overheating.
4. Using High VG E-Liquids
High VG (vegetable glycerin) e-liquids are thicker and may not wick efficiently in certain coils.
What Happens:
The thicker consistency of high VG juice can cause wicking issues, leading to dry hits.
Solution:
- Choose the Right E-Liquid: Use an e-liquid with a balanced VG/PG ratio (e.g., 50/50 or 60/40) for coils with smaller wicking ports.
- Consider a Compatible Coil: If you prefer high VG e-liquids, use a coil specifically designed for thicker juices.
5. E-Liquid Level Is Too Low
If the e-liquid in your tank is too low, the coil may not have enough juice to draw from.
What Happens:
When the tank is nearly empty, the wick can dry out, causing the cotton to burn.
Solution:
- Keep the Tank Filled: Ensure the e-liquid level is always above the wicking ports.
6. Faulty Coil
Sometimes, the issue isn’t with the setup but with the coil itself.
What Happens:
A manufacturing defect can cause the coil to burn prematurely, even when new.
Solution:
- Replace the Coil: If priming and adjustments don’t resolve the issue, install a new coil.
- Choose High-Quality Coils: Opt for trusted brands like Longmada, known for durable and reliable coils.
7. Using the Wrong E-Liquid for the Coil
Some e-liquids aren’t suited for certain types of coils.
What Happens:
Sweetened or flavored e-liquids can leave residue on the coil, causing it to burn faster.
Solution:
- Opt for Low-Sweetener E-Liquids: These are less likely to gunk up your coil.
- Clean Your Tank: Regular cleaning prevents flavor mixing and residue buildup.
Avoiding Burnt Tastes with Longmada Coils
At Longmada, we design coils for superior performance and longevity. Our upgraded coils operate efficiently at 20–25W, delivering the same heat and vapor quality as other brands at higher wattages (30–40W). This makes them energy-efficient, less prone to burning, and easier on your battery.
Why Choose Longmada?
- Advanced wicking for consistent flavor.
- Longer-lasting performance.
- Optimized for a range of e-liquids.
By following these tips and using high-quality coils like Longmada’s, you can prevent that unpleasant burnt taste and enjoy a smooth, flavorful vape every time.
