How to Make Your Motar1 & Motar2 Coil Last Longer — Longmada Official Guide

Best Tips for Coil Maintenance & Proper Usage Guide

Longmada's Motar1 and Motar2 are popular devices known for their powerful performance and pure taste. However, like any heating device, the coil is the core component, and taking good care of it is essential for longer lifespan, better flavor, and safer use.

Here are some professional tips to help you extend the life of your Motar1 and Motar2 coils.

1. Use the Recommended Power: 20W-25W

Always set your device to 20-25W power when using Motar1 or Motar2 coils.

Too much power will:

• Burn the coil faster

• Damage the heating element

• Reduce the lifespan significantly

Too little power will:

• Affect the vapor production

• Leave unheated material inside

Stable wattage ensures better performance and protects your coil.

2. Preheat Before Use for Better Performance

Before loading materials or starting your session, we highly recommend preheating the coil for a few seconds.

Benefits of Preheating:

• Faster vaporization

• Even heating

• Better flavor and experience

• Reduced stress on the coil

3. Use Manual Mode for Small Amounts of Material

Motar1 and Motar2 support both Auto Mode and Manual Mode.

Tips:

• Auto Mode heating time is 60 seconds by default.

• If you're using a small amount of material, use Manual Mode to control the heating time.

Remember:

The longer you heat, the faster the coil will wear out.
Use shorter heating time when possible to protect your coil.

4. Pause After 3 Consecutive Uses

To prevent overheating, it's best to pause after using the coil for 3 consecutive heating cycles.

Let the coil cool down for a few minutes before starting a new session.

This practice helps:

• Prevent coil burnout

• Protect device safety

• Extend coil lifespan

5. Avoid Dropping or Impact

The heating bowl inside the coil is fragile.

Please avoid:

• Dropping the device

• Impacting hard surfaces

• Shaking the coil violently

Any impact might cause internal damage or misalignment of the heating element.

6. Do Not Touch the Heating Bowl When Hot

During heating, never use metal tools or hard objects to touch the heating bowl.

Why?

• It may move or damage the heating element

• The coil may not work properly afterward

Always wait until the coil cools down before any adjustment or cleaning.

7. Clean Only After the Coil Has Completely Cooled

Proper cleaning is essential for maintaining the coil’s performance.

Cleaning Steps:

• Wait until the coil cools down completely

• Use a cotton swab (dry or slightly damp)

• Gently wipe off residue

• Never use metal or sharp tools

Regular cleaning after cooling can prevent residue build-up and extend coil life.

8. Recommended to Use with Longmada Trunk Battery

For the best user experience and coil protection, we strongly recommend using our original Longmada Trunk Battery.

If you use other brands’ batteries:

• Make sure the wattage is adjustable

• Keep the power within 20W-25W

• Avoid overheating to prevent burning the coil

Our Trunk Battery is optimized for Motar1 and Motar2 coils.

9. Correct Steps for Coil Replacement

When installing a new coil:

Step 1: Connect the coil firmly to the base first.
Step 2: Then connect the base (with the coil) to the battery.

Important:

Do NOT connect the coil directly to the battery before securing it to the base — this may cause a short circuit or battery damage.

Final Summary — Best Practices for Coil Longevity

FAQ Section（常见问题）

Q1: How often should I clean the coil?

A: After every few uses or when residue builds up. Always wait for the coil to cool completely before cleaning.

Q2: How long does a coil typically last?

A: With proper usage, a coil can last between 1-2 months depending on usage habits.

Q3: Can I use my own battery with Motar1 or Motar2?

A: Yes, but please make sure to control the wattage between 20W-25W for the best protection.

Q4: What should I do if the coil smells burnt?

A: Clean the coil thoroughly after cooling down. If the smell persists, consider replacing the coil.

Need Help? Contact Longmada Support

If you have any questions, need assistance, or want to purchase replacement parts — feel free to contact us anytime!

• Email: info@longmada.com

• WhatsApp: +86 188 2507 2667

• Website: www.longmada.com

We are always here to help you with professional service and support!

Recommended Products