When using your Longmada Motar 3 vape device, taking good care of your coil (heating chamber) is essential for getting the best performance and saving money in the long run.
The Motar 3 coil is a high-performance heating element, but improper use can shorten its life. In this guide, we’ll share practical tips on how to use your Motar 3 coil properly and extend its lifespan.
1. Use the Recommended Power Setting: 20-25W
Always use your device at the correct power range — we recommend 20W to 25W.
-
Using too high wattage may burn the coil quickly.
-
Too low power may cause uneven heating or residue build-up.
Using the right wattage ensures stable heating and better vapor performance.
2. Preheat the Coil Before Use
Before you start vaping, it’s a good habit to preheat the coil for a few seconds.
Benefits of preheating:
-
Faster and smoother vapor production
-
Helps activate the material evenly
-
Reduces sudden temperature shock to the coil
3. Choose Manual Mode for Small Amounts of Material
Motar 3 has two heating modes:
-
Auto Mode: 60 seconds per heating cycle
-
Manual Mode: Controlled by pressing the button
If you only load a small amount of material, it’s better to use Manual Mode and control the heating time yourself. This avoids overheating the coil unnecessarily.
4. Pause After 3 Continuous Cycles
If you use Auto Mode or heat the coil continuously, we recommend:
-
Use 2-3 cycles
-
Then let the device rest for 2-3 minutes to cool down
This helps prevent overheating and protects the coil structure.
5. Handle with Care — Avoid Dropping or Knocking
The heating coil is a precision part. Please avoid:
-
Dropping the device
-
Hitting hard objects
-
Shaking the device when the coil is hot
Impact or vibration may cause the heating bowl (ceramic dish) to shift out of place and make the coil unusable.
6. Do Not Touch the Hot Heating Bowl
When the coil is heating or still hot:
-
Never touch it with metal tools or hard objects
-
Avoid cleaning while hot
Doing so may damage or displace the heating element.
7. Clean the Coil After It Cools Down
Always wait until the coil has fully cooled before cleaning.
Recommended cleaning method:
-
Use a cotton swab (dry or slightly damp) to gently wipe away residue
-
Avoid using sharp tools
Regular cleaning after the device cools down helps keep the coil in good condition.
8. Use Motar 3 Battery for Best Performance
We strongly recommend using our original Motar 3 battery, which is designed to work perfectly with the Motar 3 coil.
If you use another brand of battery:
-
Make sure the wattage is adjustable
-
Keep the power within 20-25W
-
Avoid high-temperature output to prevent coil damage
9. Correct Coil Installation Matters
When replacing the coil:
Step 1: Connect the new coil securely to the base.
Step 2: Then connect the base (with coil) to the battery.
Warning:
If you connect the coil directly to the battery without securing it to the base first, there is a high risk of short-circuiting the battery.
Final Tips
By following these simple but important steps, you can enjoy a better vaping experience while making your Motar 3 coil last much longer.
Remember: Proper use and care will not only save you money but also protect your device from unnecessary damage.
Need Help or Replacement Parts?
Feel free to contact our customer service for any questions or coil replacements.
Email: info@longmada.com
WhatsApp: +86 188 2507 2667
Website: www.longmada.com
We are always happy to assist you!
