Flare R Disposable Dab Pen for Rosin Wax Shatter Budder With Replaceable Heating Chamber Sliver(2pc)

Prduct Size:112.2*33.3*32mm

Battery Capacity:380mAh

Resistance:1.0Ω

How to use:

In the case of power off, 
a, short press 5 times to turn on the machine, enter into the warm-up state, the digital tube display from 38 to start to time until the end of the OUT2 + output 
output, full power output, 25 seconds, stop output, in the process of 38 seconds, short press the key to exit the preheating; 

2) In the case of power on, 
a, short press the key 3 times to adjust the voltage gears, the digital tube displays the voltage, the voltage is adjusted upward from the current voltage every second, to the highest 2.8v, jump to 1.8v. a, short press the key 3 times, adjust the voltage level, the digital tube display voltage, from the current voltage every second up to the most 
high-grade 2.8v, jump to 1.8v, such as the need for which voltage level, when the required voltage is displayed, short press the key once, that is, 
selected the corresponding voltage level; 

b, short press the key 2 times, enter the preheating, OUT2 + output, full-power output, 25 seconds, a total of 38 seconds; 

c, long press the key, the longest output of the OUT + 9 seconds, release the key, the OUT + output stops, digital tube Display, first display the output voltage 
for 1 second, and then 9 seconds to the timing until the end 

d, 10 minutes, automatic shutdown 

3) Charging, 
a, digital tube battery symbols progressive blinking display, full of battery symbols do not blink, full light, after a period of time, the display 
all out 

4) Low power, the digital tube on the battery symbols on the bottom of the section, blinking 8 times 
No load at power-on, the digital tube on 00 blinking 8 times During operation, the load is short-circuited, 88 on the digital tube blinks 5 times 

5) Quiescent current less than 10 uA 

6) Charging current, max. 0.5A