Longmada Motar 3 Usage Guide

Quick Start:

1. Fully charge the device before first use.
2. Press and hold the button for 3 seconds to unlock/lock the device (accompanied by a motor vibration).
3. Single-click to cycle through temperature settings:

• Blue (Low) / Green (Medium) / Red (High) / White (Max)

4. Double-click to start heating, press and hold the button anytime to stop. Pulsating light indicates the device is heating up (accompanied by two motor vibrations).

• Blue Light - 300°C; (0°C - 350°C heating in 5 seconds, then maintains 300°C for 50 seconds)
• Green Light - 350°C; (0°C - 400°C heating in 5 seconds, then maintains 350°C for 50 seconds)
• Red Light - 400°C; (0°C - 450°C heating in 5 seconds, then maintains 400°C for 50 seconds)
• White Light - 450°C; (0°C - 500°C heating in 5 seconds, then maintains 450°C for 50 seconds)

5. After 50 seconds of operation, all lights will turn off and the motor will vibrate.
6. Clean the body after each use with a dry tool. Gently wipe in circles.
7. Triple-click to display the battery percentage: Green - High / Orange - Medium / Red - Low

Error Indications:

1. Heating Vessel Not Connected (3 white light blinks)
2. Heating Vessel Error (Red-White-Red-White)
3. Low Battery (3 red light blinks)

#longmadamotar

#wax

#dryherb

#vapestore

#vapewave